HobbyWireless
T313 TRANSMITTER 1.3 GHZ 300 MW
(CH1 | 1240 MHz) |
(CH2 | 1280 MHz) |
(CH3 | 1320 MHz) |
(CH4 | 1360 MHz) |
Weight | 19g (transmitter only) |
Details:, This is a custom design to be used on applications were weight and reliability is a must., Channels:, , Features:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
It's not the same technology offered by most of retailer ...HobbyWireless
T1012 TRANSMITTER 1.2 GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
Weight | 30g (transmitter only) |
Transmission power 50-ohm load CH1 Vcc = 12V | 30dBm |
Nominal output impedance | 50 ohms |
Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum) |
Supply current Vcc = 12V | 450mA (typical), 500mA (maximum) |
Video input voltage 75-ohm impedance | 1Vp-p |
Audio input voltage 10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Storage humidity | 10 to 80% |
Dimension and weight Excluding SMA connector | 50 x 26 x 13mm, 20g |
to see the transmitter and camera connections. Note | BNC to RCA adpater is sold separately in accessories. |
Details:, This transmitter is a power house, providing a 1000 miliwatts of pre RF output. It is the best transmitter for long range applications. (for RC models is recommended to install the T1012 as far as possible away from the models receiver) Even with all that power, it weights only around 1oz 30 grams . With all this, and the right setup, for sure you can get video reception miles away. It is highly recommended to install the transmitter in ventilated areas, to allow the air to keep it cool. As any of our transmitters, T1012 has digital Phase-Lock-Loop circuit avoiding frequency drift, providing a stable and solid audio and video delivery. You can not go wrong with it., Features:, , Specifications:, , Standard shipping package:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Click here for Specs 1000mW RF output power Eight (8) ...HobbyWireless
DJI 900 MHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)
Details:, , The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,
The new DJI Downlink is specially designed to work with ...HobbyWireless
DJI 2.4 GHZ DATALINK + WKM MAP VIEW SOFTWARE
Details:, The Data Link to gives us the access to control your Multirotor remotely using a LapTop., DJI offers 2.4Ghz and 900MHz datalink to achieve long-range two-way communication. The datalink maximum distance is up to 15km. The ground end also link with USB power supply that is convenient for outdoor using. The wireless module uses FHSS technology which is verified by FCC and CE certification, DJI datalink has many advantages such as: high data rate, stable performance, strong anti-interference capability, and long communication distance. The 2.4GHz datalink’s power consumption is 550mw and 900MHz datalink 1.5W, which is big advantage for long-distance flight mission., Note:, No license is required to purchase it, however i, Disclaimer:, Hobby Wireless is not responsable for any damage, loss or illegal operation. It will be totally the user's responsibility to use this device legally and safetly.,
The Click-2-Go mode allows you to choose a point on ...HobbyWireless
EASY STAR II - MULTIPLEX
Construction | Elapor foam on the fuselage, wing and tail section Wings |
Radio | 3-channel Servos |
Wingspan | 54" (1370mm) Wing Area |
Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,
HobbyWireless
NEW *FPV1380 PLUG AND PLAY 1.3GHZ *800MW WIRELESS SYSTEM - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
Nominal output impedance | 50 ohms |
Operating Voltage | 10.5 - 13 volts DC |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - The USA version transmitter will have two channels available, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...HobbyWireless
FPV905 PLUG AND PLAY 900MHZ 500MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, The FPV905 transmitter can be powered through a JST connector using any DC power source from 9 to 13 volts (note: a 3s 11.1v lithium polymer battery can be used to power the system)., Package includes:, - R900 high sensitivity receiver, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV905 complete Audio ...HobbyWireless
NEW *FPV1380 PLUG AND PLAY 1.3GHZ *800MW WIRELESS SYSTEM - USA VERSION 1258 AND 1280 MHZ
Nominal output impedance | 50 ohms |
Operating Voltage | 10.5 - 13 volts DC |
75-ohm impedance | 1Vp-p |
10k ohm impedance | 1Vp-p |
Sub carrier frequency | 6.5MHz |
Operation temperature | -10 to 40 degrees Celsius |
Storage temperature | -40 to 80 degrees Celsius |
Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, Features:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - Do not turn this transmitter on and leave it on for several minutes without air flowing through, it gets hot. This is powerful transmitter in a tiny little metal box !!!, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...HobbyWireless
*NEW FPV584 PRO-DUO PLUG AND PLAY 5.8 GHZ 400MW WIRELESS SYSTEM - NEW VERSION
- Working voltage | DC 12v (3S 11.1v Lipo battery with |
- 8 Selectable channels | DIP switches |
Frequencies | CH1 |
- Current consumption | ~280mA |
- Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
- Selectable channels | DIP switches |
Frequencies | CH1 |
- Working voltage | 12 VDC |
- Receiving sensitivity | < -90dBm |
- Receiving frequency | ISM 5.8GHz 8CH |
- Antenna port | 50ohm SMA |
- Power supply | DC12V 220mA |
- Video output level | 1Vp-p @ 75ohm |
- Audio output level | 1Vp-p @ 10Kohm |
- Dimensions | 76 x 64 x 18 mm |
- Current consumption | 120mAh |
Details:, , Another great feature of this system is the 2x audio and video outputs, which gives you the ability of connecting more than one device simultaneously such as: (2x video displays) or (1x video glasses and 1X video display) or (1x video display and 1x video recorder) or (1x video glasses and 1x video recorder)..., Transmitter's features:, - Output Power:400mW, Receiver's features:, - R5800DX Duo Audio and Video outputs., - Antennas:, 5.8 GHz Helical Axial, Includes:, , Notes:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
The FPV584 Pro-Duo is the best 5.8 GHz set up ...HobbyWireless
*NEW TX-V1380 800MW 1.2 GHZ PLUG AND PLAY TRANSMITTER - INTERNATIONAL VERSION
Details:, The TX-V1380 transmitter has 8 available selectable channels, and they can not be shipped within US territory because there some channels that are not legal to be used in US. The transmitter has a customized interfaced board to make it very easy to be used for FPV, and another great featur is that the whole transmitter, Features:, - High quality microphone, - Available Frequencies:, , Notes:, We recommed using a, Disclaimer: Hobby Wireless is not responsible for any damage, loss, or illegal changes and operation done by the user.,
only weights around 1oz (30g). The transmitter has 7 selectable ...HobbyWireless
*NEW TX-V1380 800MW 1.2 GHZ PLUG AND PLAY TRANSMITTER 1258/1280 MHZ - US VERSION
Details:, The TX-V1380 transmitter has two available channels to be used in US 1258 MHz and 1280 MHz. It uses a customized interfaced board to make it very easy to be used for FPV, and another great featur is that the whole transmitter, Features:, - High quality microphone, - Available Frequencies:, 1258 MHz and 1280 MHz, Notes:, We recommed using a, Disclaimer: Hobby Wireless is not responsible for any damage, loss, or illegal changes and operation done by the user.,
only weights around 1oz (30g). The transmitter has 7 selectable ...HobbyWireless
10HZ GPS ANTENNA LS20031 FOR DRAGON OSD
Details:, This 10Hz LS20031 is a complete GPS receiver ready to use with Dragon OSD., Features:, , Example of Applications:,
It's a LOCOSYS product with a 66 channel GPS receiver ...HobbyWireless
ZAP ODORLESS FOAM SAFE MEDIUM CA - 1 OZ.
Details:, , Description:,
A must-have for foam model making Zap-O Odorless Foam Safe ...HobbyWireless
CASTLE CREATIONS THUNDERBIRD 36 BRUSHLESS SPEED CONTROL
* Battery Eliminator Circuit (BEC) | eliminates receiver battery |
* Low torque "Soft Start" | protects gear boxes and belt drives from shock |
* Simple setup | no complicated switches or wiring |
* Self-calibrating endpoints | maximizes usable stick travel |
* Max volts | 15 volts 3S Lipo 12 NiCad/NiMh |
* BEC | Linear regulator 3 amp max |
* Length | 1.5" (38.1mm) |
* Width | 1" (25.4mm) |
* Height | 0.35" (8.8mm) |
* Weight | 0.7 (20g) |
* Brake | On/Off |
Details:, , Description:, , Specs:, , * Max amps: 36,
Need some power in your flying wing? Try a Thunderbird-36 ...